Epson L18050 maintenance box: certainly when you encounter the
maintenance box is at the end of service
life error on your Epson
l1850 printer it means that the
maintenance box needs to be replaced
here are the steps to change the
maintenance box replace the maintenance
box turn off the printer and unplug it
from the power source open the printer
cover to access the maintenance box
remove the used maintenance box from its
holder no make sure you have a new
maintenance box or Maintenance Box chip
before you begin if you have a new chip
then replace the chip in the old
Maintenance Box this will reduce your
cost if you have a new chip then replace
the chip in the old Maintenance Box this
will reduce your cost place the used
maintenance box in the plastic bag that
came with the new maintenance box seal
the bag and dispose of it properly
for
insert the new maintenance box into the
holder and push it all the way in insert
the maintenance box cover into the tabs
on the product as shown close the cover
and tighten the screw to secure it
remember to handle the maintenance box
carefully and follow the manufacturer’s
guidelines
if you need additional assistance
consider watching video tutorials or
reaching out to Epson customer support
happy printing